Charming Friendship Bracelet

What You'll Need:

• 4 colors of embroidery floss, 2-1/2 feet each
• Deli containers with the 6 recycling symbol (or shrink plastic)
• Permanent marker pens
• Gold metallic elastic thread
• Tape
• Scissors
• Pencil
• Hole punch
• Aluminum foil
• Oven

Step 1: Tie the four different colors of embroidery floss together. Tape the knotted end to a table top.

Step 2: Select a color of floss to begin. Make a loop with the floss and bring the end through the loop.

Step 3: Pull the strand tightly to make a knot. Repeat this knot until you have covered about one inch, pulling the knots up tightly as you go. The knots will naturally spiral around the inner threads. If you'd like, add charms to your bracelet.

Step 4: To make charms: Download the Stencil Instructions as a PDF. Place clean, flat pieces of plastic over the patterns, and trace with a pencil. Using markers, color the backgrounds, then add details and outline. You can also draw designs of your own, making them about the same size as the pattern shapes.

Step 5: Cut out the plastic shapes. Punch a hole in each one, not too close to the edge.

Step 6: Ask an adult to help with this step. Lay plastic shapes on aluminum foil and bake in an oven set at 300 degrees Fahrenheit for one to two minutes. The plastic will curl and shrink, then gradually flatten. Remove the charms from the oven when they're almost flat.

Step 7: Cool charms completely, then string them onto your woven bracelet or onto elastic thread, making a knot to tie each charm about 1/2 inch from the others. Cut the thread after seven or eight charms and knot the ends securely.

Source: howstuffworks.com

OTHER RELATED INFORMATION

Please LIKE , Tweet , +1 and Share if you like this article...

How to Make Swarovski Crystal Woven Earrings

Jewelry making can be very enjoyable and rewarding. Not only do many people find beads to be a lovely item to collect, but the idea of using these beautiful beads to make unique jewelry is a craft that is gaining popularity.

With a little experience and knowledge you could easily learn how to create a pair of earrings in as little as ten minutes. Here are simple instructions for earrings that are attractive and stylish.

Step 1
Cut a 8-inch length of beading wire. Find the center of the wire.

Step 2
Thread the 4-mm Swarovski Crystal bead onto the wire and place it in the center of the wire.

Step 3
Thread a 3-mm Swarovski Crystal bead onto each side of the 4-mm bead.

Step 4
Thread one end of the beading wire through one end of another 3-mm Swarovski Crystal bead. Thread the other end of the beading wire through the opposite end of the same Swarovski Crystal bead. Pull each end of the wire tight to pull the bead down tightly against the other beads.

Step 5
Thread another 3-mm Swarovski Crystal bead onto each end of the beading wire. Push the beads down tightly against the other beads.

Step 6
Thread one end of the beading wire through one end of another 3-mm Swarovski Crystal bead. Thread the other end of the beading wire through the opposite end of the same Swarovski Crystal bead. Pull each end of the wire tight to pull the bead down tightly against the other beads.

Step 7
Pull all of the beads down tightly and thread a crimp bead onto both ends of the beading wire. Pull the crimp bead down tightly against the other beads as well.

Step 8
Thread both ends of the beading wire through the loop of an earring finding and back down into the crimp bead. Pull the beading wire tight to make sure that there is no excess of beading wire between any beads and that all the beads are tight.

Step 9
Crimp the crimp bead with the needle nose pliers to secure and finish the earring. Trim off the excess beading wire extending out from the crimped crimp bead.
Step10Repeat steps 1 through 9 to create a second earring. Pay close attention to the first earring as you make the second, to make sure that they are made the same size.

Source of Article : eHow.com

OTHER RELATED INFORMATION

Please LIKE , Tweet , +1 and Share if you like this article...

Sweet Sparkling Pink Swarovski Crystal Earrings

Jewelry Making Supplies:

1. 2 pcs silver head pins
2. 2 pcs silver eye pins
3. 2 pcs 8mm Light Rose Swarovski Crystals
4. 2 pcs 6mm Colourless Swarovski Crystals
5. 2 pcs earring findings (ear-hooks)
6. round-nosed pliers
7. flat-nosed pliers
8. wire cutters

Jewelry Making Instructions:

1. Put one light rose Swarovski Crystal into the head pin and make a loop at the other end of the pin. Repeat for the other bead and head-pin. - refer to Basic Techniques

2. Put the colourless bead into the eye-pin and make a loop on the other end. Repeat for the other bead and eye-pin.

3. Lift up the loop of the light rose bead with the flat-nosed pliers and insert the loop of the colourless bead into it. Close back the loop.

4. Lift up the ear-hook loop and attach the assembled beads into the loop. Close back.

5. Repeat step 3 and 4 for the other side of the earrings.

That's it! Your very own beautiful pair of Pink Swarovski Crystal Earrings in less than 30 minutes.

OTHER RELATED INFORMATION

Please LIKE , Tweet , +1 and Share if you like this article...